Aluminum Copper And Bimetallic Type Connectors
Aluminum Copper And Bimetallic Type Connectors
Aluminum Copper And Bimetallic Type Connectors
Aluminum Copper And Bimetallic Type Connectors
Aluminum Copper And Bimetallic Type Connectors
Aluminum Copper And Bimetallic Type Connectors

Aluminum Copper And Bimetallic Type Connectors

The clamp was designed to connect two parallel bare conductors. Conductors can be copper stranded or rods. Material is forged copper for copper to copper connection throughout the conductor range. The clamps have serrated transverse grooves for maximum conductor contact, use copper bolts and utilise Belleville washers to prevent thermal ratcheting under cyclic loads. The clamps are coated with an oxide inhibitor. And stainless botls and nuts with washers was on requirement.

feedback
Product Description

Technical Data

Model

Conductor Cross-section(mm2)

Cu 6-50 Al 16-70

Bolts

CAPG-A1

Cu 10-95 Al 25-150

1×M8×40

CAPG-A2

Cu 6-50 Al 16-70

1×M8×45

CAPG-B1

Cu 10-95 Al 25-150

2×M8×45

CAPG-B2

Cu 25-185 Al 35-200

2×M8×50

CAPG-B3

Cu 6-50 Al 16-70

2×M10×60

CAPG-C1

Cu 10-95 Al 25-150

3×M8×45

CAPG-C2

Cu 25-185 Al 35-240

3×M8×50

CAPG-C3

Cu 35-240 Al 35-300

3×M10×60

CAPG-C4

 

3×M10×70

 

Material

High strength aluminum alloy by forging. Surface treatment: Bright.

 

Product property

ALPG is used for connecting or branching AAC, AAAC or ACSR overhead conductors. Forging creates a high strength clamp. Slotted holes allow adjustment for varying conductors on each side. Its type test is in accordance with IEC61238-1.

 

Technical Data

Model

Conductor Cross-section(mm2)

Bolts

APG-A1

Al 16-70

1×M8×40

APG-A2

Al 16-150

1×M8×45

APG-B1

Al 16-35

2×M6×35

APG-B2

Al 16-70

2×M8×45

APG-B3

Al 16-150

2×M8×50

APG-B4

Al 25-185

2×M10×60

APG-C1

Al 16-70

3×M8×45

APG-C2

Al 16-150

3×M8×50

APG-C3

Al 25-240

3×M10×60

APG-C4

Al 35-300

3×M10×70

 

Parallel Groove Clamps Copper Extruded type

The clamp was designed to connect two parallel bare conductors. Conductors can be copper stranded or rods. Material is forged copper for copper to copper connection throughout the conductor range. The clamps have serrated transverse grooves for maximum conductor contact, use copper bolts and utilise Belleville washers to prevent thermal ratcheting under cyclic loads. The clamps are coated with an oxide inhibitor. And stainless botls and nuts with washers was on requirement.

For tap-off connections of copper-conductors acc. to DIN 48201

 

Material

Body: Copper alloy
Bolts: steel or stainless steel Nuts: DIN 934, steel Surface: uncoated

Model

Bolt Torque

Conductor Range mm2

Dimensions mm O.D

No./Size of Bolts

CU6-70-2

20Nm

6 to 70

2.7 to 10.5

2×M8

CU16-95-2

20Nm

16 to 95

5.1 to 12.5

2×M8

CU16-150-2

30Nm

16 to 150

5.1 to 15.7

2×M10

CU150-240-2

40Nm

150 to 240

15.7 to 20.3

2×M12

CU300-400-3

40Nm

300 to 400

22.6 to 26.7

3×M12

Feedback
Related News